PetLift Monster Bath
The Monster Bath
Consider a stainless-steel PetLift Monster Bath over a built-in shower stall! This low-profile floor bath will make it quick and easy to bathe large breeds, clean large paws and wash dirty bellies. The walk on tub floor sits just 12 inches off the ground, allowing large pets to walk right on to the tub floor without any lifting. It is furnished with 4 tie out eye hooks and adjustable legs to set proper water drainage. This durable Monster Bath is ideal for indoor/outdoor installations.
Features:
- Tub is fabricated with 16 gauge, high quality 304 grade stainless steel
- Fully welded and finely crafted to provide years of use
- Cove molding on all edges for increased tub wall integrity
- 4 eye hooks to keep animal safely secured inside while
- Adjustable feet
- Plumbing can be located on left or right side of tub
- Dimensions: 58″L x 24 1/2 “W x 52 1/2″H x 4″D
PLEASE NOTE: Low tub plumbing is necessary for installation (see our Weir Traps and other plumbing accessories)
Options:
- Bottle Holders
- Plumbing Packages
- Faucets & Sprayers
- Hair Traps & Interceptors
- Tub Racks
- Tub Mats
- Floor Mats
WARRANTY
10 Year Warranty for the original buyer against defects in material or workmanship under normal use in the service for which the product is intended. Warranty covers stainless steel animal baths against leakage and rust, provided the tub is maintained with proper care and cleaning. Please note that over time, the appearance of “rust” on the stainless steel can occur. This is not the stainless steel material, but material introduced from the environment that could include chemicals, air particles, dirt, moisture or other factors. Standard stainless steel cleaning practices will remove the appearance of staining/rust. In selecting cleaning practices, consider the possibility of scratching and the potential for post cleaning corrosion caused by incompletely removed cleaners. Select only cleaners that are not abrasive, not acidic, and low in chloride. Many antibacterial cleaners used to clean and sanitize door hardware contain high levels of chlorides, which will cause corrosion if not properly removed from the surface by rinsing.
All warranties cover defects in material and workmanship, provided the product is properly installed, properly maintained, and used for the normal purpose for which intended, and damage is not the result of abuse, misuse or neglect. PetLift S&B Manufacturing is not responsible for charges for repairs or other work without prior written authorization. We reserve the right to repair or replace defective parts at our sole discretion. This warranty does not include damage resulting from accident and expressly excludes normal wearing of parts or defect caused by transportation, accident, fire, flood, modification, alteration or negligence. PetLift S&B Manufacturing shall not be liable for any direct or indirect, incidental, exemplary, or consequential
BASE SPECS | FAUCETS & SPRAYERS COMPATIBLE | ||
Base Material | 16 ga. SS | A43-972S | Yes |
OUTSIDE DIMENSIONS | A43-972T | Yes | |
Width | 24 1/2 | HAIR TRAPS & INTERCEPTORS | |
Length | 58 | A41-675 | Yes |
Depth | 4 | A41-6 | Yes |
Height | 52 1/2 | TUB RACKS | |
SHIPPING DIMS & WEIGHTS | A80-HR2-58PC | Yes | |
Width | 40 | A80-HR2-58SS | Yes |
Length | 64 | TUB MATS | |
Height | 52 | A75-SPM-58T | Yes |
Weight | 330 | A75-ANI-58T | Yes |
ACCESSORIES AVAILABLE | FLOOR MATS | ||
Bottle Holders A10-810-4 | Yes | A35-SPM-58F | Yes |
Bottle Holders A10-820-5 | Yes | A35-ANI-58F | Yes |
PLUMBING PACKAGES COMPATIBLE | |||
A45-4C-675C | Yes | ||
A45-8C-675C | Yes |
Reviews
There are no reviews yet.